How To Get The Best Drum Pump

Many companies are responsible for managing a wide variety of different liquids. Certain liquids, depending upon their density, can weigh more than 50 pounds, which can be problematic for those using barrels and drums. Although they can store a large amount of material, it’s almost impossible to find a way to get the fluid out. You could try to tip it over, but when you are working with even the smallest 55 gallon drum, it weighs several hundred pounds. Since they cannot be tipped very easily, you must find another solution. This is where a drum pump comes in. An ATEX filling system is a popular type of drum pump.

What Does A Drum Pump Do?

This is a tool that is used for the express purpose of removing liquid inside of the barrel or drum. This will negate the necessity of taking out the liquid by tipping over the drum to remove it. There are a couple types that you may want to consider using, and they will depend on many different factors.

How Do They Work?

All you have to do is puncture a hole in the top of the drum, and by sticking in the shaft, you can begin the process. Some of them will have a motor that is powered by electricity.
Once the motor is on it can begin to function. At this point, it is actuated, allowing it to suck all of the fluid out. If you are using one that uses an impeller mechanism, these are centrifugal pumps that are very reliable to use even over the rotor counterparts.
If you don’t have one of these, or if it is too expensive, you can use one that is manually driven. You can also use these with what is called a piston pump. All of these can be substituted for the other, regardless of whether you are using a barrel or drum.

What Industries Use These Pumps?

Typically, hydro-based industries are the primary users of these pumps, but it can be any industry that has to transport or process liquids. Chemicals need to be extracted if they are being stored, and the same is true for any type of liquid that is denser than water.

The pharmaceutical industry, which is nearly $1 trillion industry, uses these all the time. There are other industries that also use them including:

Chemical plants.
Cleaning jobs.
Automotive shops.
Food processing plants.
Manufacturing plants.
Processing plants.

Various Drum Pumps You May Want To Try Out

There are a couple of these that you may want to use: there are those that will use some form of electricity and others are going to be manually operated. They are going to differ depending upon the way you are using the pumps, the model of the pump, and how it is designed.

Hand-Operated Drum Pumps

If all you have is one that is manually powered, it will not have a motor at all. These are perfect for areas of the world, or even industries, where electricity may not be reliable.

How To Get The Best One

The best one can be determined by looking at what type of pump series you have, what motor it may be using, as well as accessories that may be needed.
Compatibility is also something you need to consider which can affect the flow of the material, plus you need to consider the size of the unit, the viscosity of the fluid, and what type of chemicals you are working with.
The tube that is going to transport the fluid should be chemically resistant in certain circumstances.
Explosion proof models are also available, as well as those that use an air drive motor.
Finding accessories for these pumps is easy to do for virtually any project you could be working on. If you do need to get drum pump accessories, some of these may include drum adapters, static protection kits, and flow meters that will allow you to see how much of the fluid is being removed.